Frequently Asked Questions

Return to main FAQ Page

Return to home page

My GoSpeak! has a hum when I plug it into my PC.     hum

Several things could cause this. First make sure you are using the line in plug on the GoSpeak! for the PC. Also make sure you are using the mic in plug for the microphone and the mic out from the receiver of the wireless microphone. Next, turn up the volume on the PC as high as you can without hearing distortion. Reduce the volume on the GoSpeak! to compensate. This increases your signal to noise ratio. If these things do not solve your problem, use a ground isolation plug on the PC. This reduces the change of a ground loop.

Can I use more than one (1) mic with the GoSpeak?    

The GoSpeak only has one (1) microphone input jack. To use multiple mics, you will need to use a mic mixer. A mic mixer will have multiple mic input jacks. The output jack of the mixer then gets connected to the GoSpeak's mic input jack.

What is the impedance rating of the mic input jack?    

1KOhm